- Review prospect (pre-award) specifications for weld inspection and NDT requirements at FEED/proposal stage and liaise with Proposals Engineers to open/close any required qualifications to align with TU standard, clarifications, or deviations.
- Review contractual project (post award) specifications/documentation for weld inspection and NDT requirements at execution stage, liaising with PMA to open/close any required technical queries or deviations are opened/closed and ensure any modified weld inspection/NDT acceptance criteria are communicated to PQE for inclusion in ITP.
- Liaise with Welding Engineer and Welding Supervisor for planning of welding trials and qualifications e.g., welding procedure qualification, welder performance qualifications and production test piece to avoid clash with P6 production related inspection/NDT.
- Pre-weld inspection of welding trial or qualification samples in accordance with SI-06-455, SI06-456 and WPS requirements. (Joint set up, pure arrangement, recording of material dimensions, material heat/lot, shielding/backing gas batch numbers, recording consumable lot etc)
- In process inspection of welding trial or qualification samples in accordance with SI-06-455, SI and WPS requirements (100% weld monitoring, completion of form LTF : As-Run Data and provision to Welding Engineer)
- Post Weld VT of welding trial or qualification samples in accordance with SI-06-461, ITP and/or WPS requirements (100% VT including VT report generation and provision to Welding Engineer)
- Post weld VT of umbilical offline/online tie in welds and termination welds in accordance with SI-06-461, ITP and/or WPS requirements (100% VT including VT report generation). Delegation of duty to NDT Subcontractor EN ISO 9712 VT level II when unavailable e.g. activity clash / night shift. HR-F-033 Rev 2 Uncontrolled if printed Date of last review: April 2024
- Random in-process welding inspection to be performed on structural works performed by a TU appointed subcontractor e.g. reel packing/modifications or CAPEX projects to ensure conformance to MPS 04-11 and approved documentation
- Post-weld VT of structural works performed by a TU appointed subcontractor e.g. reel packing/modifications or CAPEX projects to ensure conformance to MPS 04-11 and approved documentation. Delegation of duty to NDT Subcontractor EN ISO 9712 VT level II when unavailable e.g., activity clash / night shift.
- Management, review and completion of NDT Subcontractor qualification matrix for personnel operating on TU site, ensuring compliance with SI requirements
- Generation and distribution of unique independently numbered and detailed NDT requests to NDT subcontractor in accordance with project requirements e.g., ITP requirement, SI
- Review of all NDT Subcontractor reports on behalf of TU to ensure completeness/correctness in accordance with ITP, SI and SI
- Minimum 10% radiographic interpretation of NDT Subcontractor images in accordance with ITP, SI and SI on behalf of TU to verify performance and ensure correct acceptance.
- Management and completion of TU Weld Tracker ensuring traceability of qualification, tie-in and termination welds is correct for feed into PowerBi weld performance statistics.
- Perform internal audits in relation to welding inspection and NDT process.
- Support external audit for welding inspection and NDT process e.g., Client audit or LRQA ISO 9001 audit.
- Raise and/or contribute to Non-Conformance Report corrective action, preventative action and closure for welding/NDT related issues.
- Problem solving and continuous improvement within welding inspection and NDT.
- CSWIP 3.1 Welding Inspector minimum (CSWIP 3.2 would be beneficial).
- Minimum ISO 9712 Radiographic Interpreter. Experience with both conventional film and computed radiography images beneficial.
- Minimum of two years industrial experience working within the welding inspection, NDT coordination or a similar role
- Member of professional institution such as The Welding Institute (TWI) or be willing to work towards registration with institution and ECUK.
- Comprehensive understanding of both welding inspection and non-destructive test methods relating to welding of umbilical and structural and ancillary components with ability to analyse and conclude associated data.
- Comprehensive experience, knowledge and understanding of welding processes, procedures and qualifications inc. ability to verify compliance i.e., pre-weld, in-process and post weld inspection processes.
- Confidence and ability to accept or reject welds to international, customer and internal engineering standards and specifications relating to welding, welding inspection and NDT of umbilical tube/line pipe, structures and ancillary components effectively
- Comprehensive experience, knowledge and understanding of handling and welding of carbon steel, austenitic stainless steel, duplex/super duplex and Nickel based alloys.
- Comprehensive knowledge and understanding or quality system, reporting and traceability requirements.
- Ability to apply and verify compliance to international, customer and internal engineering standards, specifications and drawings relating to welding, welding inspection and NDT of umbilical tube/line pipe, structures and ancillary components effectively.
- Ability to communicate welding requirements and technical issues with customers, management and peers at all levels.
- Ability to communicate instructions/requirements at the necessary level and coordinate subcontractor personnel effectively.
- IT literacy (Microsoft Office applications, Adobe Acrobat)
- Composure
- Peer Relationships
- Organising
- Priority Setting
- Decision Quality
- 25 days holiday and 8 public holidays
- Private medical insurance
- Group Income Protection Plan
- Company Life Assurance Plan
- Pension scheme
- Flexible Benefits (gymflex, electric car etc)
-
Welding Inspector
1 week ago
IRS Recruitment Wallsend, United KingdomIRS Recruitment are currently resourcing for a 3.1 CSWIP Welding Inspector with immediate start in Wallsend on a long-term basis. · If you are currently looking for your next step has a Welding Inspector, this could be a great opportunity for you. · Duties will include, performin ...
-
Welding Inspector
1 week ago
TechnipFMC Newcastle upon Tyne, United Kingdom**Location**:Newcastle upon Tyne, GB · **Employment type**:Employee · **Place of work**:Office · **Offshore/Onshore**:Onshore · TechnipFMC is committed to driving real change in the energy industry. Our ambition is to build a sustainable future through relentless innovation and g ...
-
Welding Inspector
4 days ago
Talent84 Ltd Wallsend, United Kingdom Full timeTalent84 are working along side a client based in Wallsend who is looking for a CSWIP 3.1/2 welding inspector · Info: · Wallsend · £28.00 per hour · 1 - 2 days per week · Candidate: · Local to Wallsend · Hold an in date CSWIP 3.1 or 3.2 · flexible with required 1/2 days pe ...
-
Welding Inspector
3 days ago
hr@mem-engineering Hebburn, United KingdomWe are looking for a Welding Inspector for a project in South Tyneside with **immediate start**. · The minimum requirements to be considered for this role are as follows: · - CSWIP 3.1 or above · - PCN level II for MPI or an equivalent qualification (Advantageous) · 37 hours basi ...
-
Cswip Welding Inspector
4 days ago
A&P Group Hebburn, United Kingdom**A&P NORTH EAST - CSWIP Welding Inspector** · We're looking for a skilled and certified CSWIP Welding Inspector to visually examine our welded components to make sure that we are on spec each time for our customers · Then compile detailed inspection reports, is this you? · **So ...
-
Welding Inspector
4 days ago
hr@mem-engineering South Shields, United KingdomWe are looking for Welding Inspectors for a project in South Tyneside with **immediate start**. · The minimum requirements to be considered for this role are as follows: · - CSWIP 3.1 or above · - PCN level II for MPI or an equivalent qualification · 37 hours basic per week, with ...
-
Welding Inspector 3.1
1 week ago
fifth element recruitment Hebburn, United KingdomWelding Inspectors required with 3.1 required for long contract in Hebburn. · £23 dayshift all hours · £26 nights all hours · **Job Type**: Temporary contract · Contract length: 12 months · **Salary**: £26.00 per hour · Schedule: · - 8 hour shift · - Monday to Friday · - Overtime ...
-
Welding Inspector
1 week ago
People Ready Solutions Bedlington, United Kingdom**Experienced welding inspector required by our expanding client **(3.2 CSWIP required with Rad Interpretation and qualified to do LP preferred), with a good knowledge of quality systems. · Experience should include, but not limited to Oil & Gas, and nuclear types of industry. · ...
-
Welding Inspector
1 week ago
Texo Recruitment Blyth, United Kingdom**TEXO Recruitment **have an immediate need for an experienced Welding Inspector to join the existing team at **TEXO Port Services** in Blyth. · **Purpose of the Role**: · - You will maintain and improve the standards of welding operations. · - You will be the technical focal poi ...
-
Welding Inspector
1 week ago
Hydram Engineering Ltd Ferryhill, United KingdomAn opportunity has arisen for a Welding Inspector / Responsible Welding Coordinator to become part of the Quality Team. Reporting to the Quality Manager, you will provide support to the Manufacturing Manager and Welding Supervisors regarding all aspects of welding discipline. · T ...
-
Welding Inspector
4 days ago
Sterling Recruitment Services Bishop Auckland, United KingdomSterling Recruitment Services are working with a industry leading client, due to substantial growth are looking to add a experienced Welding Inspector to their team. · Reporting to the Quality Manager, you will provide support to the Manufacturing Manager and Welding Supervisors ...
-
Welding Inspector
5 days ago
Major Recruitment Ferryhill, United KingdomAn opportunity has arisen for a Welding Inspector / Responsible Welding Coordinator to become part of the Quality Team with a well known client in the Ferryhill area. Reporting to the Quality Manager, you will provide support to the Manufacturing Managerand Welding Supervisors re ...
-
Welding Inspector
1 week ago
Northern Manufacturing Ltd. Newton Aycliffe, United KingdomThe role of Welding Fabrication Team Leader reporting directly with the production manager. You must have a strong welding and fabrication background and have a minimum of months experience of leading a team. A typical week within the role of Welding and Fabrication Team Leader w ...
-
Weld Inspector/ndt Inspector
1 week ago
CDM Recruitment Hebburn, Tyne and Wear, United KingdomWe are working for with our client who is a busy fabrication company in their search for a Welding inspector · Working with team of welders to ensure quality standards · * Liaising with clients on quality specs · * Resolving quality issues · * Experience writing and working w ...
-
Welding Inspector
1 week ago
CDM Recruitment South Tyneside, Tyne and Wear, United Kingdom Permanent, Full timeWe are working for with our client who is a busy fabrication company in their search for a Welding inspector · The suitable candidate must have a CSWIP 3.1 as a minimium for this role · Responisbilities: · Checking welds are to spec · Working with team of welders to ensure qualit ...
-
NDT Welding Inspector
6 days ago
Reed Engineering South Tyneside, Tyne and Wear, United KingdomQuality Assurance Manager/Welding Supervisor circa £40,000 + depending on experience. · We are seeking a dedicated and experienced Quality Assurance Manager/Welding Supervisor to join our clients busy metal fabrication shop in South Shields. In this pivotal role, you will be res ...
-
Quality Control Inspector
1 week ago
Responsive Engineering Ltd Newcastle upon Tyne, United KingdomResponsive Engineering are recruiting for a Quality Control Inspector to provide inspection to the fabrication and welding areas. Working as part of the inspection team you will be responsible for ensuring that all manufactured products fully conform to customer requirements, whi ...
-
Quality Inspector
5 days ago
Westray Recruitment Group Gateshead, United KingdomWHAT COMPANY YOU WILL BE WORKING FOR · Westray Recruitment Group is seeking an experienced Quality Inspector for our client based in Blaydon. The role works within a busy Fabrication company that specialises in both welding and machining services. · £13-£15 p/h DOE · 4-day week · ...
-
Welders
1 week ago
A&P Group Hebburn, United Kingdom**A&P NORTH EAST - Welders** · We've been building the foundations of our team for the future and are now in a strong position to hire more Welders. You'll work as part of our skilled team ensuring that we deliver product to the highest possible standard for our customers. · Are ...
-
Welders
1 week ago
A&P Group Hebburn, United Kingdom**A&P NORTH EAST - Welders** · We've been building the foundations of our team for the future and are now in a strong position to hire more Welders. You'll work as part of our skilled team ensuring that we deliver product to the highest possible standard for our customers. · Are ...
Welding Inspector - Newcastle upon Tyne, United Kingdom - TechnipFMC
Description
Welding Inspector
Location:Newcastle upon Tyne, GB
Employment type: Employee Place of work: Office Offshore/Onshore: OnshoreTechnipFMC is committed to driving real change in the energy industry. Our ambition is to build a sustainable future through relentless innovation and global collaboration – and we want you to be part of it. You'll be joining a culture that values curiosity, expertise, and ideas as well as diversity, inclusion, and authenticity. Bring your unique energy to our team of more than 20,000 people worldwide, and discover a rewarding, fulfilling, and varied career that you can take in anywhere you want to go.
Job Purpose
To support various departments of the business unit and associated subcontractors in ensuring weld quality, integrity and traceability throughout umbilical manufacturing including proposals, qualification, umbilical lay-up and termination. Accountable and responsible for welding inspection and coordination of the NDT subcontractor as laid out within standards/specifications, inspection test plans and framework agreements throughout project life cycle for Newcastle upon Tyne site. Required to liaise, consult and inform Technical Authority, stakeholders and subcontractors when required.
Job Description
Required qualifications
You are meant for this job if:
Behavioral Competencies
What we offer
Being a global leader in the energy industry requires an inclusive and diverse environment. TechnipFMC promotes diversity, equity, and inclusion by ensuring equal opportunities to all ages, races, ethnicities, religions, sexual orientations, gender expressions, disabilities, or all other pluralities. We celebrate who you are and what you bring. Every voice matters and we encourage you to add to our culture.
TechnipFMC respects the rights and dignity of those it works with and promotes adherence to internationally recognized human rights principles for those in its value chain.
Learn more about TechnipFMC and find other open positions by visiting our Career Page.
Follow us on LinkedIn for company updates.
Date posted: May 7, 2024 Requisition number: 6513